A three days (30hrs) intensive and practical hands on training in Instrumentation and process control. This is a 100% practical based training with live experience on our automation studio which houses a live process plant.
Day One
Field instrument Identification, classification, and principle of operation
Activities:
- Trainees will be presented, thought to identify, and classify various field instrument such as Transmitters, switches, sensors, control valves etc.
- Trainees will be though the principle of operation of all the major field instrument and how they are deployed in various applications.
Instrument control loop
Activities:
- Trainees will be thought to wire up a 4-20ma control loop in our state-of-the-art process automation studio from the transmitter in the field to the field junction box and to the marshalling cabinet down to the system cabinet
- Commissioning of the loop will also be carried out by our trainees to ascertain the proper functionality of the loop.
Day Two
Instrument Tube fittings, Tubbing and cable trays
Activities:
- Trainees will be trained and meant to identify various tubing fittings, tubbing devices and there uses
- They will carry out tubing activities as the trainer instructs
- They will carry out commissioning of there tubing works with the in-studio provided air compressor
- They will carry out cable laying and termination
Instrument calibration and control loop troubleshooting
Activities:
- Identification and uses of various instrument used to maintain the field devices such as multimeter loop calibrator, HART communicator, etc
- Carry out both online and offline calibration of various field devices.
- Control loop troubleshooting with loop calibrator, HART communicator, etc.
Day three
PLC IO configuration, programming, setup, and commissioning
Activities:
- The trainees will identify the I/O to the PLC and how they are wired up.
- The trainees will carry out PLC configuration, programming, setup and downloading/uploading the program to the PLC
- The Trainees will carry out PLC system commissioning
PLC/HMI and field device setup
Activities:
- Trainees will learn how to configure the HMI screens and application graphics
- The trainees will carry out network configuration and setup the communication between the PLC and HMI
The Trainees will be provided with the following during the training:
Comprehensive training materials including eBooks, videos, and software
Certificate of completion
Tea break and lunch will also be provided during the training
Date: 29th of July 2021 to 31th of July, 2021.
Time: 8:00-6PM daily
Sit reservation is limited.
click here to register